DSR® KVM over IP switches

Click here for a sample installation

DSR® KVM over IP switches provide BIOS-level control of all connected servers and serial-based devices in your data center. DSR switches let you remotely manage and power cycle connected devices, and provide external modem support when the network is down. DSR switches feature an on-board Web interface compatible with Internet Explorer, Mozilla, Firefox or Netscape for access and control of your servers over IP.

As an administrator, you can use DSR KVM switches to manage remote data centers and branches as if you were present in each location. This reduces downtime by providing you with easy access and control to any connected server or device.

Add DSView® 3 management software and gain the benefits of centralized management of your DSR KVM switches and attached servers. DSView 3 software gives you one common interface to access and manage console and power management appliances. It also provides secure access authentication, a failover hub and spoke architecture, event notifications, and access to IPMI-enabled servers.

When used with selected DSR switches, DSView 3 software provides a Virtual Media capability so you can map local storage media to a remote server.

DSR1010 KVM Switch

DSR combines power of analog and digital KVM switching for data center control

Features and Benefits

The DSR®1010 16-port KVM over IP appliance provides digital and analog connectivity to all major server platforms and serial-based devices. The DSR1010 contains one local port for access at the rack and one Ethernet port for IP access. Avocent DSView management software provides a secure method to remotely access and control servers and network devices from a single interface.
 

• 16 systems digital KVM switch
• Works with DSRIQ CAT 5 “smart” cable to significantly reduce cable bulk in the rack
• Features connections for 16 servers in a 1U chassis
• Provides analog access at the rack, and anywhere, anytime digital IP access
• Works with our DSView® 3 management software* for secure, centralized control of all connected devices

Mechanical		Height		1.75 in. (4.45 cm)
		Width		17.00 in. (43.18 cm)
		Depth		11.00 in. (27.94 cm)
		Weight		8 lbs. (3.6 kg) without cables
Environmental		Operating Temp		32 to 104 degrees F (0 to 40 degrees C)
		Storage Temp		-4 to 158 degrees F (-20 to 70 degrees C)
Power		Operating Voltage		100 to 240 VAC
		Power Frequency		50 - 60 Hz Auto Sensing
		Input		40W maximum
Supported Hardware		Computers		PS/2, Sun, USB and VT100 serial-based device
		Monitors		VGA, SVGA (XGA, XGA-II with adaptor) Maximum resolution Local Port: 1600 x 1280 @75Hz, Digital Port Maximum Input Resolution 1280X1024, 75Hz
		Peripherals		USB keyboard and mouse, PS/2 keyboard, PS/2 mouse, IntelliMouse
Standards		Approved Agency		EN55022 Class A,EN55024,EN6200-3-2,EN6100-3-3,FCC15 Class A, VCCI Class A, IEC950,EN60950,UL 1950 third edition,CSA C22.2 No.950